← a22i.pw
VESC Configurator Beta FW Auto

Welcome

Set up your VESC in the browser Beta

For firmware 6.05, 6.06 and 7.00. Works in Chrome and Edge, Bluetooth also on Android phones.

This tool is still in beta. Save a backup of your configuration before you write anything, and if something looks off, use VESC Tool.

Not connected.

Wizards

Connection

Not connected

Bluetooth

VESC Express, nRF module or the VESC BLE Bridge. Chrome or Edge, on a computer or Android.

Paired devices

  • None yet

USB

VESC directly over a USB cable, or a USB serial adapter on the UART port. Chrome or Edge on a computer.

Granted ports

  • None yet

CAN Bus

Which VESC you are configuring. If it sits behind a VESC Express, everything is forwarded over CAN.

  • Connect first

Firmware

Upload your own firmware

Pick the .bin from your firmware build. Nothing is downloaded from anywhere else.

Uploading firmware for the wrong hardware version WILL damage the hardware. Save a backup of your configuration first, new firmware can reset it.

Setup Motors FOC

1 Motor

Choose a motor size similar to the motor you are using. Choosing a significantly too large motor is likely to destroy the motor during detection.

Advanced

2 Battery

3 Drive train

4 Detection

This is going to spin up the motor! Wheel off the ground, chain or belt off, make sure nothing is in the way.

    Quick Settings

    Search

    Realtime Data

    Motor currentBattery currentDuty ×100

    Polled every 250 ms while this page is open. Swipe back for the gauges.

    Terminal

    
    			

    Backups

    Save

    As XML like VESC Tool, so you can load it there as well.

    Load

    Values from the backup are only applied once you write the configuration.

    Reset

    Debug Console

    
    		
    Not connected

    Connect to your VESC first.